Since devices using Bluetooth technology communicate
using radio waves, your device and the other devices do
not need to be in direct line-of-sight. The two devices only
need to be within a maximum of 10 meters of each other,
although the connection can be subject to interference
from obstructions such as walls or from other electronic
devices.
Start using Bluetooth
Select Menu > Connect. > Bluetooth.
1. When you activate Bluetooth for the first time, you are
asked to give a name to your device. Give your device
a unique name to make it easy to recognize if there
are several Bluetooth devices in the vicinity.
2. Select Bluetooth > On.
3. Select My phone's visibility > Shown to all.
Your device and the name you entered can now be seen
by other users with devices using Bluetooth technology.
Settings
Define the following settings:
• Bluetooth — Select On to be abl e to conne ct to ano ther
compatible device using Bluetooth connectivity.
• My phone's visibility — Select Shown to all to allow
other devices using Bluetooth technology to find your
device when you have set Bluetooth > On. To prevent
other devices from finding your device, select Hidden.
Even if you select Hidden, paired devices can still detect
your device.
• My phone's name — Enter a name for your device. The
name is visible to other devices that search for devices
using Bluetooth technology. The maximum length of
the name is 30 characters.
• Remote SIM mode — Select On to enable another
device, such as a compatible car kit enhancement, to
use the SIM card in your device to connect to the
network. See "SIM access profile," p. 59.
If Bluetooth was turned off as a result of entering
Offline profile, you must re-enable Bluetooth manually.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
Send data
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
time.
1. Open the application where the item you want to send
is stored.
2. Select the item, and select Options > Send > Via
Bluetooth. The device searches for other devices using
Bluetooth technology within range and lists them.
Tip: If you have sent data using Bluetooth
before, a list of the previous search results is
displayed. To search for more Bluetooth
devices, select More devices.
57
Connectivity
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 57 Feb 23, 2006 10:58:54 AMfile:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 57 Feb 23, 2006 10:58:54 AM