Nokia E60 - Retrieval Settings

• My e-mail address — Enter the e-mail address given to
you by your service provider. Replies to your messages
are sent to this address.
• User name — Enter the user name for the e-mail
service.
• Password — Enter the password for the e-mail service.
• Outgoing mail serv. — Enter the IP address or host
name of the mail server that sends your e-mail. You
may only be able to use the outgoing server of your
network operator. Contact your service provider for
more information.
• Access point in use — Select the Internet access point
that the device uses for sending the e-mail messages
that you send.
• Security (ports) — Select the security option used to
secure the connection to the remote mailbox.
• Port — Define a port for connection.
User settings
Select User settings and from the following settings:
• My name — Enter a name to appear before your e-mail
address when you send e-mail.
• Reply-to — Select whether you want replies to be
redirected to a different address. Select On, and enter
the e-mail address to which you want to direct the
replies. You can only enter one address to which replies
are directed.
• Delete e-mails from — Select whether you want to
delete the e-mails only from the device or from both
the device and the server. Select Always ask if you want
to confirm from where the e-mail should be deleted
every time you delete an e-mail.
• Send message — Select to send the e-mail as soon as
possible, to send it the next time you retrieve e-mail,
or to store the e-mail in the Outbox, from where you
can send it later.
• Send copy to self — Select whether you want to save
a copy of the e-mail to your remote mailbox and to the
address defined in My e-mail address in the settings
for Outgoing e-mail.
• Include signature — Select whether you want to
attach a signature to your e-mail messages.
• New e-mail alerts — Select whether you want to
receive the new e-mail indications, a tone and a note,
when new mail is received to the mailbox.
• Default encoding — Select the preferred method for
character encoding.
Retrieval settings
Select Retrieval settings and from the following settings:
• E-mail to retrieve (for POP3 mailboxes only) — Select
whether you want to retrieve only the e-mail header
information such as sender, subject and date, e-mail,
or e-mail with attachments.
• Retrieval amount — Select the number of e-mails you
want to retrieve from the remote server to your
mailbox.
• IMAP4 folder path (for IMAP4 mailboxes
only) — Define the folder path for folders to be
subscribed.
• Folder subscriptions (for IMAP4 mailboxes
only) — Subscribe to other folders in the remote
mailbox and retrieve content from those folders.
Automatic retrieval settings
Select Automatic retrieval and from the following
settings:
49
Messages
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 49 Feb 23, 2006 10:58:54 AMfile:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 49 Feb 23, 2006 10:58:54 AM