• Set up an e-mail account, and define the e-mail
settings correctly. See "E-mail account
settings," p. 48.
Follow the instructions from your remote mailbox and
Internet service providers. Contact your network and
Internet service providers or operator for the correct
settings.
Set up your e-mail
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start setting up
the e-mail account with the mailbox guide, select Yes.
1. To start entering the e-mail settings, select Start.
2. In Mailbox type, select IMAP4 or POP3, and select Next.
Tip: POP3 is a version of the post office
protocol that is used to store and retrieve e-
mail or Internet mail messages. IMAP4 is a
version of the Internet message access
protocol that lets you access and manage e-
mail messages while the messages are still on
the e-mail server. You can then choose which
messages to download to your device.
3. In My e-mail address, enter your e-mail address. To
insert @ or other special characters, press *. To insert
a full stop, press 1. Select Next.
4. In Incoming mail serv., enter the name of the remote
server that receives your e-mail, and select Next.
5. In Outgoing mail serv., enter the name of the remote
server that sends your e-mail, and select Next.
Depending on your mobile operator, you might have
to use your mobile operator's outgoing mail server
instead of your e-mail provider's.
6. In Access point, select the Internet access point your
device should use when it retrieves the e-mails. If you
select Always ask, each time the device starts to
retrieve e-mail, it asks which Internet access point it
should use, but if you select an access point, the device
makes the connection automatically. Select Next.
Tip: If you select Select group, the device
makes the connection automatically using
the best available Internet access point from
the access point group. Select the access point
group, and Back to save the selection.
7. Enter a name for your new mailbox, and select Finish.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messag. main view. You
can have up to six mailboxes.
Select your default mailbox
If you have defined several mailboxes, you can select one
of them as your default mailbox. To define the default
mailbox, select Options > Settings > E-mail > Mailbox
in use and the mailbox.
If you have defined several mailboxes, you must select the
mailbox that you want to use every time you start
composing a new e-mail message.
Connect to mailbox
E-mail addressed to you is not automatically received by
your device, but by your remote mailbox. To read your e-
mail, you must first connect to the remote mailbox; then
select the e-mails you wish to retrieve into your device.
45
Messages
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 45 Feb 23, 2006 10:58:54 AMfile:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml Page 45 Feb 23, 2006 10:58:54 AM
To Next Page
Loading...
