Nokia FastMile 4G - Page 104

Mounting and connecting the Nokia FastMile 4G
Receiver
98
Nokia FastMile 4G Receiver Installation Guide
3TG-00387-ABBA-TCZZA Issue: 01
Table 7 Status LED behavior for a Nokia FastMile 4G Receiver remotely
managed from an ACS
19 If you installed a Compact multi-band model of the Nokia FastMile 4G Receiver, you can
check the signal strength LEDs on the Nokia FastMile 4G Receiver by pressing the
measurement button on the side of the unit. Figure 58 shows the location of the
measurement button.
Green Third priority Blinking twice per second Kernel and application start up
Blinking one per second Application start up
Solid Start up
Off OAM link is established
LED color LED priority LED behavior Status information
Blue First priority Blinking Bluetooth connection in progress
Solid Bluetooth connection established
Off No Bluetooth connection
Green Second priority Blinking twice per second Kernel and application start up
Blinking one per second Application start up
Solid Start up
Off Software is stable
LED color LED priority LED behavior Status information
(2 of 2)