Nokia FastMile 4G Receiver Installation Guide Identifying package contents
Issue: 01 3TG-00387-ABBA-TCZZA 35
7 Identifying package contents
7.1 Package contents for the Nokia FastMile 4G Receiver
7.1 Package contents for the Nokia FastMile 4G
Receiver
The shipping package for the Nokia FastMile 4G Receiver contains the following:
• Nokia FastMile 4G Receiver
• QR code on a sheet of paper:
• the QR code has system-use information for the Nokia FastMile 4G Receiver
• you use a mobile phone that has the Nokia Wireless app to scan the QR code to log
in to the Nokia FastMile 4G Receiver (log in is done through Bluetooth over a VPN
connection)
• bracket kit consisting of:
• mounting plate
• receiver bracket (shipped attached to the mounting plate with three fasteners)
• two fasteners for attaching the mounting plate to the Nokia FastMile 4G Receiver
• SIM card tool for safe insertion or extraction of SIM card; the tool is sometimes
referred to as a “nipple”
If you will be installing a Compact multi-band model of the Nokia FastMile 4G
Receiver, you will need to provide a cat5e shielded Ethernet cable that has standard
pinouts and is a maximum of 80 m (262 ft) in length; the same cable is also used for
power (PoE as per IEEE802.3 at type-2). The cable will need a male RJ 45 connector
to attach the cable to the Nokia FastMile 4G Receiver.
If you will be mounting the Nokia FastMile 4G Receiver on a pole, you will need kit
3TG-00291-AA that contains the pole adapter for the Nokia FastMile 4G Receiver.
To Next Page
Loading...
