Nokia FastMile 4G - Determining the Mounting Location for Unit that will be Managed by an ACS

Nokia FastMile 4G Receiver Installation Guide Determining the mounting location
Issue: 01 3TG-00387-ABBA-TCZZA 69
10.3 Determining the mounting location for unit
that will be managed by an ACS
If an ACS will be used through TR-069 to remotely manage the Nokia FastMile 4G
Receiver, use the following procedure to use the Nokia Wireless app, which works in
conjunction with the Nokia FastMile 4G Receiver, to help you determine the
mounting location for the Nokia FastMile 4G Receiver. This procedure does not
involve the use of the Nokia Altiplano FastMile Controller.
The Nokia Wireless app works in conjunction with the signal strength measurement
capability of the Nokia FastMile 4G Receiver to find a place to mount the Nokia
FastMile 4G Receiver.
You will need the Nokia FastMile 4G Receiver and a portable battery-powered PoE
injector for this procedure. You might need to provide an Ethernet cable to connect
to the Compact multi-band model of the Nokia FastMile 4G Receiver (the Compact
mono-band and ABA models have a pre-attached Ethernet cable). An appropriate
SIM card must be installed in the Nokia FastMile 4G Receiver as described in
chapter 9.
The Nokia Wireless app must be installed on a mobile phone as indicated in section
8.2 before you can use the app to help you determine the mounting location for the
Nokia FastMile 4G Receiver. You will need the sheet of paper provided with the
Nokia FastMile 4G Receiver that has the QR code for the Nokia FastMile 4G
Receiver. As well, you will need to allow access to the mobile phone’s location as
part of the procedure. You will also need to know the username and password to log
in to the Nokia FastMile 4G Receiver.
The following need to be considered before you can start to determine the mounting
location of the Nokia FastMile 4G Receiver with the Nokia Wireless app:
• Follow the steps with exact order described in the procedure
Procedure 8 To determine the mounting location for unit that will be managed by
an ACS
Use the following procedure to determine the mounting location for a Nokia FastMile 4G Receiver
that is to be managed by an ACS through TR-069.
1 At a prospective mounting location for the Nokia FastMile 4G Receiver, connect the mobile
phone to the Internet and open the Nokia Wireless app on the phone.
An introductory screen with a video appears.
Figure 30 shows the introductory screen.