Mounting and connecting the Nokia FastMile 4G
Receiver
100
Nokia FastMile 4G Receiver Installation Guide
3TG-00387-ABBA-TCZZA Issue: 01
Stop the measurement by pressing the measurement button. When the Nokia FastMile 4G
Receiver attaches to a cell, the number of LEDs that correspond to the signal strength level
will be on continuously.
20 Installation is complete.
See the Product Overview for information about managing the Nokia FastMile 4G Receiver.
Caution — This step only measures signals, and indicates the signal
strength level of the best signal in the direction, during measurement
when the Nokia FastMile 4G Receiver is not attached to a cell. If you do
a measurement for a Nokia FastMile 4G Receiver that is attached to a
cell, the Nokia FastMile 4G Receiver will detach from the cell during the
measurement. At the end of the measurement, the Nokia FastMile 4G
Receiver requires a reboot in order to attach to the best cell.
To Next Page
Loading...
