Nokia FastMile - 10 Determining the Mounting Location; Overview

Nokia FastMile 4G Receiver Installation Guide Determining the mounting location
Issue: 02 DRAFT 3TG-00387-AADA-TCZZA 25
10 Determining the mounting
location
10.1 Overview
10.2 Determining the mounting location for unit that will be managed by the
Nokia Altiplano FastMile Controller
10.3 Determining the mounting location for unit that will be managed by an
ACS
10.1 Overview
Some steps in the procedures for determining the mounting location for the Nokia
FastMile 4G Receiver depend on whether it will be managed remotely by the Nokia
Altiplano FastMile Controller (through NETCONF) or by an ACS (through TR-069).
See section 5.1 for more info about using the Nokia Altiplano FastMile Controller or
an ACS for remote management of the Nokia FastMile 4G Receiver.
If the Nokia Altiplano FastMile Controller will be used for remote management of the
Nokia FastMile 4G Receiver through NETCONF, you use the Nokia Wireless app,
which works with the Nokia Altiplano FastMile Controller and the Nokia FastMile 4G
Receiver to determine the optimal mounting location for the Nokia FastMile 4G
Receiver, as described in section 10.2.
If an ACS will be used for remote management of the Nokia FastMile 4G Receiver
through TR-069, you use the Nokia Wireless app, which works with the Nokia
FastMile 4G Receiver to determine the optimal mounting location for the Nokia
FastMile 4G Receive as described in section 10.3.
10.2 Determining the mounting location for unit
that will be managed by the Nokia Altiplano
FastMile Controller
If the Nokia Altiplano FastMile Controller will be used through NETCONF to remotely
manage the Nokia FastMile 4G Receiver, use the following procedure to use the
Nokia Wireless app, which works in conjunction with the Nokia Altiplano FastMile
Controller and the Nokia FastMile 4G Receiver, to help you determine the mounting
location for the Nokia FastMile 4G Receiver.