Nokia FastMile - Figure 33 Screen for Sharing Location for Unit that will be Managed by an ACS

Nokia FastMile 4G Receiver Installation Guide Determining the mounting location
Issue: 02 DRAFT 3TG-00387-AADA-TCZZA 53
Figure 33 Screen for sharing location for unit that will be managed by an
ACS
Share your location by tapping on “Next”.
6 Unpack the Nokia FastMile 4G Receiver and connect a portable battery-powered PoE to the
Ethernet cable (Compact mono-band and ABA models) or Ethernet port (Compact
multi-band models) of the Nokia FastMile 4G so that the Nokia FastMile 4G Receiver powers
up.
This will allow you to connect the Nokia Wireless app to the Nokia FastMile 4G Receiver so
the Nokia Wireless app can set it up and work in conjunction with it to find the strongest signal
as described in the next steps.
7 The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The
connection will be done through a VPN. You will need to be close to the Nokia FastMile 4G
Receiver and you will need to have Bluetooth enabled on the mobile phone and accept the
pairing request when it appears.
Figure 34 shows the screen to connect to the Nokia FastMile 4G Receiver.