Nokia Mobile Phone - Device Manager

These options are available only if a compatible memory card
is inserted in the device.
Select Options and from the following:
● Memory card options — Rename or format a memory
card.
● Memory card password — Password protect a memory
card.
● Unlock memory card — Unlock a memory card.
Device manager
Remote configuration
Select > Settings > Device manager.
With Device manager, you can manage settings, data, and
software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles and
different configuration settings from your service providers
or company information management department.
Configuration settings may include connection and other
settings used by different applications in your device. The
available options may vary.
The remote configuration connection is usually started by the
server when the device settings need to be updated.
To create a new server profile, select Options > Server
profiles > Options > New server profile.
You may receive these settings from your service provider in
a configuration message. If not, define the following:
● Server name — Enter a name for the configuration
server.
● Server ID — Enter the unique ID to identify the
configuration server.
● Server password — Enter a password to identify your
device to the server.
● Access point — Select the access point to use for the
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you have
selected Internet as the bearer type.
● Host address — Enter the web address of the
configuration server.
● Port — Enter the port number of the server.
● User name and Password — Enter your user ID and
password for the configuration server.
● Allow configuration — Select Yes to allow the server to
initiate a configuration session.
● Auto-accept all requests — Select Yes if you do not want
the server to ask for your confirmation when it initiates a
configuration session.
● Network authentication — Select whether to use http
authentication.
● Network user name and Network password — Enter
your user ID and password for the http authentication.
This setting is available only if you have selected Network
authentication to be used.
To connect to the server and receive configuration settings
for your device, select Options > Start configuration.
To view the configuration log of the selected profile, select
Options > View log.
To update the device software over the air, select Options >
Check for updates. The update does not erase your settings.
© 2009 Nokia. All rights reserved.72