3. Open the C-COVER.
4. Unscrew the Torx Plus® size 6 SCREWS in the order shown. For assembly, use the reverse order with
a torque setting of 14Ncm.
5. Place the SRT-6 between the A-COVER and the UI FRAME ASSY and unlock the first snap. Then follow the
order shown in picture 6.
6. Unlock the four snaps with the SRT-6 in the shown direction.
RM-91; RM-92
Nokia Customer Care Disassembly/Reassembly Instructions
Page 5 –6 COMPANY CONFIDENTIAL Issue 1
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
