31. Open snap 4.
32. Open snap 5.
33. Remove the KEYMAT BEZEL.
34. Remove the ITU KEYMAT.
35. Unscrew the Torx Plus® size 6 SCREWS in the order shown. For assembly, use the reverse order with
a torque setting of 23Ncm.
Note: Always use new SCREWS when reassembling the unit.
RM-91; RM-92
Disassembly/Reassembly Instructions Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 5 –13
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
