Table 9 Pixel defects
Item White dot defect Black dot
defect
Total
1 Defect
counts
R G B White Dot
Total
1 1
1 1 1 1
2 Combined
defect
counts
Not allowed.
Two single dot defects that are within 5 mm of each other should be interpreted
as combined dot defect.
Note: Blinking pixels are not allowed in normal operating temperatures and light conditions.
RM-91; RM-92
BB Troubleshooting and Manual Tuning Guide Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 6 –45
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
