3. Choose Tools→Options→GPIB Card.
4. From the Card Type drop-down menu, choose the GPIB card used, then click Start.
The name of the communication tester appears in the Listeners pane.
5. To specify the cable loss from a module jig to the communication tester, choose Set Loss from the
Tuning menu.
6. In the
Set Loss
window, click the Jig tab, and select the right jig for the phone from the drop-down list.
Alternatively, you can add a new jig by clicking Add, and selecting the desired jig from the list.
7. Click the Cable tab and add the extra cable attenuation.
8. To start autotuning, choose Auto-Tune from the Tuning menu.
9. In the
Auto-Tune
window, click Options.
10. In the
Auto-Tune options
window, ensure the Enable showing of message boxes check box is checked,
and click OK.
RM-91; RM-92
Nokia Customer Care RF Troubleshooting and Manual Tuning Guide
Page 7 –26 COMPANY CONFIDENTIAL Issue 1
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
