2. In the Tuning menu, choose WCDMA→Rx Calibration .
3. Click Start.
4. Select Band "WCDMA 1900" for RM-91 and "WCDMA 2100" for RM-92.
5. Click Tune.
6. Setup the signal generator to correspond with the values on the,
Rx Calibration
pop-up window and
click OK.
Figure 62 Pop-up window for WCDMA1900
Figure 63 Pop-up window for WCDMA2100
RM-91; RM-92
RF Troubleshooting and Manual Tuning Guide Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 7 –47
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
