2. Make the selection as shown in the box below:
3. Press Start.
Now you should see the following box:
4. Measure the ouput power via the WLAN/ BT RF connector with a power meter.
For Power level 1: 17.5dBm, you shall see +16dBm (+/- 1dB).
5. Repeat steps 2 to 4 for the other power level.
You shall see the following values:
• Power output level 2 = 14dBm (+/- 1dB)
• Power output level 3 = 9dBm(+/- 1dB)
• Power output level 4 = 6dBm (+/- 1dB)
6. Now repeat the same exercise for Data Rate = 54Mbps.
You shall see the following power levels:
• Power output level 1 = 13dBm (+/- 1dB)
RM-91; RM-92
RF Troubleshooting and Manual Tuning Guide Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 7 –59
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
