Figure 68 Blurring caused by shaking hands
Movement in bright light
If an image is taken of moving objects or if the device is used in a moving vehicle, object 'skewing' or 'tilting'
may occur. This phenomenon is fundamental to most CMOS camera types, and usually cannot be avoided.
The movement of camera or object sometimes cause blurring indoors or in dim lighting conditions because
of long exposure time. This is normal; do not change the camera module.
Figure 69 Near objects get skewed when taking images from a moving vehicle
Temperature
High temperatures inside the mobile phone cause more noise to appear in images. For example, in >40
degrees (Celsius) ambient, the noise level may increase and it further grows if the conditions are dim. If the
phone transmitter has been running at full power or the processor has been heavily loaded for a long time
before image taking, the temperature inside the phone might be considerably higher than the temperature
in the surrounding environment. This is normal to camera operation, do not change the camera module.
RM-91; RM-92
Camera Module Troubleshooting Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 8 –7
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
