Nokia N80 User Manual

ESD protection
Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing
the phone.
Any product of which the covers are removed must be handled with ESD protection. The SIM card can be
replaced without ESD protection if the product is otherwise ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD. Resistors, too, can be damaged by static electricity
discharge.
All ESD sensitive parts must be packed in metallized protective bags during shipping and handling outside
any ESD Protected Area (EPA).
Every repair action involving opening the product or handling the product components must be done under
ESD protection.
ESD protected spare part packages MUST NOT be opened/closed out of an ESD Protected Area.
For more information and local requirements about ESD protection and ESD Protected Area, contact your local
Nokia After Market Services representative.
RM-91; RM-92
ESD protection Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page v
Copyright © 2006 Nokia. All rights reserved.

Nokia N80 Specifications

General

Internal Memory	40 MB
Battery	Removable Li-Ion 820 mAh battery (BL-5B)
Weight	134 g (4.73 oz)
Announced	2005, November
Status	Discontinued
SIM	Mini-SIM
CPU	220 MHz Dual ARM 9
Secondary Camera	CIF videocall camera
Alert types	Vibration; Downloadable polyphonic, monophonic, MP3 ringtones
Loudspeaker	Yes
3.5mm jack	No
WLAN	Wi-Fi 802.11b/g, UPnP technology
GPS	No
Radio	Stereo FM radio
USB	Pop-Port
Messaging	SMS, MMS, Email, Instant Messaging
Browser	WAP 2.0/xHTML, HTML
Java	Yes, MIDP 2.0
Stand-by	Up to 192 h
Talk time	Up to 3 h
Colors	Silver, Black
Network	GSM / UMTS
Infrared Port	Yes
Display	TFT, 256K colors
Camera	3.15 MP
Card Slot	miniSD
Operating System	Symbian OS 9.1
Pixel density	259 ppi density
Bluetooth	v1.2