Nolan N-Com B602 User Manual

EN
20
9. MOBILE PHONE / MP3 PLAYER PAIRING
• Make sure the B602 is turned off.
• Put the system in “Pairing” mode: press and hold the “n” key for 4 seconds, until the red LED light
appears.
• In Complete Mode : press the “” key until “ Phone pairing ” appears.
In Simple Mode : do not press any key.
• Activate the search of Bluetooth devices on the mobile phone.
• Select the N-Com device. If a password is requested, enter 0000 (four zeros).
• Connection between the two devices is established after a few seconds.
N.B.: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two
devices are turned off. As a result it needs to be carried out only once.
NB: if a Bluetooth device has already been stored in the B602 system’s memory, any new pairing will
overwrite the previous pairing.
Automatic Connection
Once the Bluetooth device has been paired, connection is automatic
when the system is turned on.
Manual Connection
In case connection is not automatically initiated after a few seconds, you
can connect from the Bluetooth device or by pressing and holding the “n”
key for about 2 seconds.
10. SECOND MOBILE PHONE PAIRING
The “Second mobile phone” function is available only in Complete Mode.
The B602 system can be hooked up to two phones at the same time. The second phone (secondary
device) can receive calls but not make them.
To pair the second Bluetooth phone (secondary device):
• Make sure the B602 is turned off.
• Put the system in “Pairing” mode: press and hold the “n” key for 4 seconds, until the red LED light
appears.
• Press the “”key until you hear the voice prompt “ Second mobile phone pairing ”.
• Activate the search of Bluetooth devices on the mobile phone.
• Select the N-Com system from the list. If a password is requested, enter the code 0000 (four
zeros).
• After a few seconds, the connection between the two devices is activated.
Once the Bluetooth device has been paired, connection is automatic when the system is turned on.
N.B.: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two
devices are turned off. As a result it needs to be carried out only once.
NB: if a second device has already been stored in the B602 system’s memory, any new pairing will
overwrite the previously stored pairing.

Nolan N-Com B602 Specifications

General

Brand	Nolan
Model	N-Com B602
Category	Motorcycle Accessories
Language	English