Nolan N-Com B602 - Mobile Phone Operations; Speed Dial Functionality

21
11. MOBILE PHONE
To pair a mobile phone to the B602 system, follow the procedure illustrated in Chapter 7.
Answering a phone call
Briefly press any key when you hear the incoming call signal.
Vocal answer (VOX phone)
The “ VOX phone ”
function is available only
in Complete Mode.
When you hear the ringtone, say any word out loud.
You can enable / disable the “VOX phone” function by using
the N-Com EASYSET program or the N-Com EASYSET APP.
The function is not active during the intercom connection.
Voice assistant
Press and hold “n” key for about 2 seconds.
Hanging up/rejecting a phone call
Press and hold “n” key for about 2 seconds.
Manual phone connection
Press and hold “n” key for about 2 seconds.
11.1. Speed dial
The “Speed Dial” function is available only in Complete Mode.
Using the N-Com EASYSET program or the N-Com EASYSET App, you can store
up to 3 of your favourite numbers, which you will be able to dial from the
“ Speed Dial ” menu.
Saving the Speed Dial numbers
To assign one or more speed dialling numbers:
• Select Configuration Menu: with the N-Com system already switched on, press the “” e “” keys
simultaneously for 4 seconds, until the red LED light appears.
• Press the “” or “” key until you hear the voice prompt “ Speed dial ”.
• Press the “n” confirmation key. You will hear the voice prompts “ Speed dial 1 ” and “ Phone
connected ”.
• Press the “” or “” keys to select the speed dialling number to be assigned. The saved position
is confirmed by the voice prompt “ Speed dial 1 ” / “ Speed dial 2 ” / “ Speed dial 3 ”.
• On your own mobile phone (paired and connected to the N-Com system), call the phone number
you wish to assign to the selected speed dialling position. The call is interrupted before it goes
through, and the selected number will be saved; at this point you will hear the special voice
prompt confirming the selection (“ Save Speed Dial 1 ” / “ Save Speed Dial 2 ” / “ Save Speed Dial 3 ”).
Using the stored numbers
To access the “Speed Dial” menu, press simultaneously the “n” and “” keys (“ Speed Dial ”), then use
the “” and “” keys to scroll through the menu items.
Then press the “n” key to confirm the selection of one of the following items:
• Last number redial
• Speed Dial 1
• Speed Dial 2
• Speed Dial 3
• Cancelled