ACCESS GATEWAY
100 System Administration
Group Bandwidth Limit Policy – Enable
The Group Bandwidth feature is globally enabled via an option on the Bandwidth management
page. You can also enable Weighted Fair Queueing from this screen. See “Weighted Fair
Queueing” on page 26.
Group Bandwidth Limit Policy – Current Table
When the feature is enabled, a group bandwidth policy ID column is displayed in the current
table. Once policies are instantiated, policy information can be viewed via XML.
The NSE can concurrently support some subscribers as part of a group and some
others with limits set on a per-subscriber basis. However, a single subscriber
cannot be assigned group membership and individual limits at the same time.
To Next Page
Loading...
