ACCESS GATEWAY
System Administration 141
8. Post-paid PMS only: If you selected a Post-paid PMS option, you can define an Idle
Timeout
(in minutes) and an Idle Data Threshold (in bytes). These selections determine
the thresholds when a “post-paid” hotel guest will be automatically disconnected from the
service.
Property Management Systems generally operate at different baud rates. You must now
select an appropriate baud rate for your chosen PMS.
9. Select the Speed of PMS Interface and Serial Settings from the available list. If you are
not sure which baud rate to choose, select
Not Sure and the system will attempt to use the
default.
10. You must now select the Type of Service Post Mappings you require relative to the
billing plans you established in “Defining the Billing Options {Billing Options}” on
page 217.
To Next Page
Loading...
