ACCESS GATEWAY
128 System Administration
When either Interface Monitoring or link status is used, WAN ports will be characterized as
either Available or Unavailable. If Load Balancing is configured to use Interface Monitoring
but Monitoring itself is not configured, the status will be Unknown.
Using Link state will provide a faster response, but using Interface Monitoring will assure that
there is internet access through that port before assigning subscribers to it.
Run Time Status gives a useful summary of all Load Balancing settings and subscriber
distribution.
Establishing Your Location {Location}
This command sets up your location and the corresponding IP addresses for the network
interface, subscriber interface, subnet, and default gateway. You *must* provide your full
location information.
1. From the Web Management Interface, click on Configuration, then Location. The
Location Settings screen appears:
To Next Page
Loading...
