Nomadix AG5900 - Subscriber Administration Menu; Adding Subscriber Profiles {Add

ACCESS GATEWAY
System Administration 203
Subscribers can communicate with each other when on the same VLAN and the same IP
subnet. The NSE will not respond to any ARP requests from the subscriber for other
subscribers (or hosts) that are on the same port-location subnet.
To enable intra-port communication
1. Click Port-Location -> List. Click on the Port number. The Process Port-Location
Assignment screen appears.
2. Click Allow Intra-port communication.
3. Click Add/Update.
Subscriber Administration Menu
Adding Subscriber Profiles {Add}
This procedure shows you how to add subscriber profiles into a table of authorized users.
Three types of subscriber profiles are provided; see the following sections for configuration
information for the different profile types:
 “Adding a Subscriber Type Profile” on page 204
 “Adding a Device Type Profile” on page 206
 “Adding a Group Type Profile” on page 207
For more information about subscriber access and billing options, see the following sections:
Subscribers in same port/location
Subscriber Side
Network Side