ACCESS GATEWAY
322 Quick Reference Guide
New Attributes in Acct-Request
The Access Gateway has to send the following attributes in an Accounting-Stop:
Acct-Output-Packets: number of packets sent by subscriber.
Acct-Input-Packets: number of packets received by subscriber.
Upon a reboot, these 2 attributes are saved in currfile.dat the same way as for Acct-Input-
Octets and Acct-Input-Octets.
Nomadix Vendor-Specific RADIUS Attributes
Nomadix provides the following vendor-specific RADIUS attributes. This list may vary
depending on your configuration.
If you plan to implement RADIUS, go to “Contact Information” on page 349 for
Nomadix Technical Support.
Attribute
Integer
Value
Description
Nomadix-BW-Up 1 Value (in Kbps) restricts the
speed at which uploads are
performed.
Nomadix-BW-Down 2 Value (in Kbps) restricts the
speed at which downloads are
performed.
Nomadix-Url-Redirection 3 Allows the administrator to
redirect the user to a page of
the administrator’s choice
each time the user logs in
Nomadix-IP-Upsell 4 Allows the user to receive a
public address from a DHCP
pool when the NSE has This
feature enabled.
Nomadix-Expiration 5 Allows the administrator to set
an expiration date and time
for a user.
Nomadix-Subnet 6 Specifies which DHCP pool
the user should receive their
DHCP lease from.
To Next Page
Loading...
