Norac UC4+ - Operator Safety

2
2 Materials
Table 1: Items included in the UC4 Resource Kit
Item Part Number Name Quantity
B01 44968 ULTRASONIC SENSOR CALIBRATION FIXTURE TYPE2 1
C01 44644-04 CABLE BUSMONITOR POWER STAND-ALONE DEVICE 1
E01 54733 NORAC USB DRIVE - TOOLSUITE AND VERIFICATION TOOL 1
E02 44644 CANBUS MONITOR 1
M01 44645-MAN1 MANUAL UC4 SENSOR TESTING 1
M02 44645-MAN2 MANUAL UC4 PANEL PROGRAMMING 1
**M05 106127 ADH RTV 162 WHITE SILICONE - 85mL TUBE 1
*M06 44645-02 TRANSDUCER SERVICE KIT 1
*M07 44645-03 O-RING SERVICE KIT 2
*M08 44645-04 FOAM DISC SERVICE KIT 1
The following items are not included in the test kit, but are required for
testing and updating UC4 sensors and panel software:
 12 VDC (2A or greater) power supply
1
 Computer with Windows operating system.
* Items M06, M07 and M08 are available for re-order from NORAC.
** Item M05 is available for re-order from NORAC, as well as from the
manufacturer:
Item # Description
Manufacturer Part #
M05
ADH RTV 162 WHITE
SILICONE - 85mL TUBE
MG Chemicals
/Momentive
RTV162-
85mL
1
Recommended power supply:
Catalog #22-507 available from RadioShack (United States)
Catalog #2208247 available from The Source (Canada)