NORAUTO NS-228 DBT User Manual

147
Getting Started
Before use the Bluetooth device, you need to pair the device to the
unit� Pairing needs only to be done once�
Pairing the Bluetooth devices
1 Open your mobile phone and switch bluetooth on�
2 Search for other bluetooth device with your device�
3 Select “NS-228 DBT” in the pairing list�
4 [PAIRED] will be displayed on the panel if pairing is successful,
and the paired device will connect to the car audio system
automatically�
Making a Call
You can dial number through the mobile phone�
1 Use the Mobile Phone to dial and make an outgoing call�
2 Once completed the dialing, [CALLING] is displayed�
To redial number
1 Press on front panel to redial�
2 The unit will display [CALLING], and the unit starts dialing the
number dialed last time�
Remark:
To make an outgoing call on this unit, the bluetooth connection
between the unit and the phone must be active�
Receiving a Call
1 If there is incoming call, the phone number is displayed� If the
incoming call has no phone number, [PHONE IN] is displayed�
2 Press to answer/accept the call�
3 When conversation ends, press to terminate the call�

NORAUTO NS-228 DBT Specifications

General

Brand	NORAUTO
Model	NS-228 DBT
Category	Car Receiver
Language	English