148
Call Transfer
You can transfer voice from loudspeaker to mobile phones during
call�
During talking, press and hold voice transfers from loudspeaker
to mobile phone�
Bluetooth Audio Streaming A2DP
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to the music stored on
the device through the unit� If the device also supports Audio Video
Remote Control Profile (AVRCP) profile, you can use the control on
the unit or its remote control to play music stored on the device�
1
Press
SRC
repeatedly to select
[BT AUDIO]
�
2
Press to start play, press it again to pause�
3
To track up/down, press
�
DAB Operation
DAB RADIO
1
Browse through the programme sources with the
SRC
button to
DAB�
2
Press the menu button repeatedly when the product is in DAB
mode to browse through the menu options: SCAN=>12V
ON / OFF=PRUNE(DAB RESET)=RE-CON= RGB COLOR =CLK=BEEP
SCAN
1
Press the button (
MENU
) to select the station search function
SCAN, and confirm by pressing the power switch button�
2
The system searches for DAB stations�
3
The number of stations found is shown in the display and first
station found is played� Press the button for about 2 seconds
to save the station in the station memory under the required
shortcut button (M1-M6)� Tap the required shortcut button to set
the station�
To Next Page
Loading...
Need help?
General
