Norcold N3150 - Refrigerator Maintenance

Installation and Owner’s Manual 11
Gas ame appearance:
While in GAS operation, examine the appearance of the gas ame:
- Turn the refrigerator on, select manual gas mode, and coldest temperature setting.
- Open the lower intake vent.
The burner box cover can be hot. Wear gloves to avoid burns.
- Remove the burner box cover by removing the screw.
- Look at the gas ame [75] (See Art01605).
- The ame should be:
- a darker blue color on the inside of the ame and a lighter blue color on the outside of
the ame.
- a constant shape without ickering.
- Contact your dealer or Norcold authorized service center if the ame is:
- yellow
- ickering or changing shape.
- Make sure the ame does not touch the inside of the ue tube [76].
- If the ame touches the inside of the ue tube, contact your dealer or Norcold authorized service center.
- Close the burner box door.
CAUTION
!
Refrigerator Storage
Before the refrigerator is stored for an extended (seasonal) period of time:
- Defrost and clean the interior of the refrigerator.
- To prevent odors and mold in the refrigerator, keep all doors open during storage.
Rotate the hook at door lock 45 degrees and lock it in place by using the strike plate, as
illustrated.
- Disconnect the fan at the rear of the refrigerator. Unplug the connector on the red wire of
the DC power cord, where shown as illustrated.
If the refrigerator is stored for an extended period of time, before start up:
- Make sure there are no obstructions in the vents, the ventilation air pathway, the
burner, the orice, or the ue area.
- Reconnect the fan at the rear of the refrigerator. Plug together the connectors on
the red wire of the DC power cord, where shown as illustrated.
Refrigerator Maintenance
Art02331
75
76
Art01605
Art02362