Nordic Cab EXPLORER - GET STARTED; MOUNTING OF CASTER; ADAPTER

To Next Page

To Previous Page

NordicCab Instructions and user manual for the NordicCab Explorer Page 10 of 25

GET STARTED

MOUNTING OF CASTER / ADAPTER

Required tools/parts:

(not included):

a. Adjustable wrench

b. Phillips screwdriver

(included):

c. Attachment bracket

d. 2x screws, washers

and nuts

Caster

Insert the bracket with the

plastic cap and release button

up in the front and centre of

the cart’s aluminium frame.

Insert the screws into the

holes from the inside of the

car, with the washer and nut

placed on the underside.

Tighten securely.

Insert the caster while

pressing the release button.

WARNING

Be careful when using a drill or another electric tool, as excessive torque can damage the screws, the

bracket, or the frame.

Tighten screws securely. Check at regular intervals that there is no slack in the bracket. Slack in the

bracket can create noise and damage the frame over time.

Other manuals for Nordic Cab EXPLORER