Nordic Cab EXPLORER - SLED;HIKING CART (SOLD SEPARATELY)

NordicCab Instructions and user manual for the NordicCab Explorer Page 23 of 25
SLED/HIKING CART (SOLD SEPARATELY)
1
2
3
4
Press and hold the black push
button on the ski bolt and
insert the bolt through the hole
in the ski bracket.
Press and hold the black push
button as you insert the bolt in
the cart.
Release the black push button
when the bolt is fully inserted,
the ski bracket should now be
firmly attached to the cart.
Pull on the ski bracket to
ensure the bracket is securely
attached to the cart. Repeat
on the other side.
5
6 7 8
PULL ARMS:
Insert the bent tube in one of
the openings in the front.
Repeat the procedure on the
opposite side.
Insert the straight tube in the
bent one. Repeat the
procedure on the opposite
side.
Choose from the 3 different
lengths as required. When
used as a sled, the longest
length is recommended.
Lock the tube with the
included Velcro pin. Repeat
the procedure on the opposite
side.
9
10
11
12
Insert the nylon end piece with
a hook in the straight tube.
Repeat on the other side.
Lock it with the included
Velcro pin. Repeat on the
other side.
Wear the harness with the
logo on the back. Adjust the
length of the shoulder straps,
both front and back, until the
belt is on the hips.
Attach the pull arm to the
harness by attaching the
carbine hook in the O-ring on
the hip belt. Repeat on the
other side.