Nordic Cab EXPLORER - Attaching End Piece to the Front Frame

NordicCab Instructions and user manual for the NordicCab Explorer Page 11 of 25
ATTACHING END PIECE TO THE FRONT FRAME
1
2
3
4
Required tools
(not included):
Screwdriver
Required parts
(included)
Screws x 4
Locate end pieces for the front
frame.
Check that the nuts are in
place.
They should point outwards
from the cart.
Pull the front part of the
canopy slightly out.
5
6
7
8
Insert the front part of the
canopy into the tracks on the
end pieces.
Then insert the end pieces into
the front frame.
Insert screws through the
holes.
Tighten the screws securely.