12
14. Identify the Left Pedal (40), which is marked
with a “Left” sticker. Using an adjustable
wrench, firmly tighten the Left Pedal counter-
clockwise into the Left Crank (15).
Tighten the Right Pedal (not shown) clockwise
into the Right Crank (not shown). IMPORTANT:
Tighten both Pedals as firmly as possible.
A
fter using the exercise cycle for one week,
retighten the Pedals. For best performance,
keep the Pedals tightened.
Adjust the strap on the Left Pedal (40) to the
desired position, and press the ends of the
straps onto the tabs on the Left Pedal. Adjust
the strap on the Right Pedal (not shown) in
the same way.
15. Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hard-
ware may be left over after assembly is completed. Place a mat under the exercise cycle to protect the
floor or carpet.
1
4
40
Strap
Tab
15
To Next Page
Loading...
