To Next PageTo Next PageWhy doesn't my NordicTrack Commercial S22i Studio Cycle console turn on?
If the console doesn't turn on, ensure that the power cord is fully plugged in and that the power switch is in the reset position.
Why does the NordicTrack Commercial S22i Studio Cycle Fitness Equipment console not display correct feedback?
If the console does not display correct feedback, the reed switch should be adjusted.
What to do if the pedals slip while pedaling on NordicTrack Fitness Equipment?
If the pedals slip while pedaling, the drive belt may need to be adjusted.
What to do if the Left Crank Arm feels loose while pedaling on NordicTrack Commercial S22i Studio Cycle?
If the Left Crank Arm feels loose while pedaling, tighten the two M6 x 25mm Screws (96).
What to do if the NordicTrack Fitness Equipment console does not stay in place when moved?
If the Console does not stay in place when moved, tighten the indicated M8 Locknut (99) slightly until the Console stays in place.
General| Display | 22-inch HD touchscreen |
|---|---|
| Resistance Levels | 24 Digital Resistance Levels |
| Weight Capacity | 350 lbs |
| Bluetooth Connectivity | Yes |
| Warranty | 10-Year Frame, 2-Year Parts, 1-Year Labor |
| Weight | 203 lbs |
| Incline | 20% motorized incline |
| Decline | 10% motorized decline |
| Resistance | SMR™ Silent Magnetic Resistance |
| Speakers | 2 |
| Heart Rate Monitor | Bluetooth chest strap compatible |
Contact information for service and support via website or phone, including operating hours.
Critical warning to read all precautions and instructions before using the equipment.
Shows placement of warning decals and advises on replacements if missing or illegible.
Lists crucial safety precautions for using the studio cycle, including user responsibility and equipment care.
Details preventive and standard service plans with pricing and features for extended coverage.
Introduces the studio cycle and provides its physical dimensions for setup and space planning.
Illustrates and names small parts required for assembly, noting key numbers and quantities.
Outlines assembly requirements, tools, and the crucial first step of registering the product online.
Provides instructions and safety warnings for connecting the studio cycle's power cord to a grounded outlet.
Guides users on adjusting saddle angle/carriage and handlebar for optimal comfort.
Explains incline simulation and power output (watts) measurement.
Adjust saddle post and handlebar post height for proper ergonomic positioning.
Instructions for using pedals, toe straps, and the brake knob for resistance and stopping.
Introduces the console, its features like iFit, onboard workouts, and feedback display.
Steps for powering on the console and interacting with its touchscreen interface.
Connect to wireless network, log into iFit, customize settings, and check firmware updates.
Start manual workouts, adjust resistance/incline, monitor progress, use fan, and heart rate monitor.
Select and start featured or onboard workouts, including map-based training.
Design custom workout routes by drawing on the map and saving them for later use.
Add workouts to iFit schedule, log in, and start iFit workouts on the console.
Access settings menus, change units, update firmware, and calibrate the incline system.
Enable Wi-Fi, select network, enter password, and connect the console to the internet.
Connect audio devices, use headphones, and understand the benefits of a chest heart rate monitor.
Details FCC compliance, potential interference, and safety measures for the console's transmitter.
Procedures for console reset and incline system calibration troubleshooting.
Instructions for tightening loose left crank arm screws to the specified torque.
Steps to adjust the reed switch for accurate console feedback on pedal rotation.
Procedure for adjusting drive belt tension if pedals slip during use.
Guidance on exercise intensity, heart rate zones, workout structure, and frequency.
Illustrated guide to performing five basic stretches for improved flexibility and muscle recovery.
Instructions on how to order replacement parts, including necessary information to provide.
Details warranty coverage for frame, parts, and labor, including limitations and exclusions.
