HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER
Note: if your stereo has an unused LiNE OUT jack,
see instruction A below. [f the LmNEOUT jack is
being used, see instruction B.
A. Hug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Hug the other end of the cable
into the LiNE OUT jack on your stereo. Note: While
the cable is plugged into the LiNE OUT jack, do not
plug your headphones into the headphone jack on
the console.
A
r ......
'.@_ @.
L .... L= I
LINEOUT _
.............. 1....
A. Hug one end of a long 1/8" to 1/8" stereo audio
cable (available at electronics stores) into the input
jack on the console. Hug the other end of the cable
into the LiNE OUT jack on your computer. Note:
While the cable is plugged into the LiNE OUT jack,
do not plug your headphones into the headphone
jack on the console.
a
11
) ........i...... ,
i
= ooc
=1
Audio Cable
B. Plug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Hug the other end of the cable
into an RCA Y-adapter (available at electronics
stores). Next, remove the wire that is currently
plugged into the LiNE OUT jack on your stereo and
plug the wire into the unused side of the Y-adapter.
Hug the Y-adapter into the LiNE OUT jack on your
stereo. Note: While the Y-adapter is plugged into
the LiNE OUT jack, do not plug your headphones
into the headphone jack on the console.
B
,@" @u
i® .... ?--_
RCA
Audio Y-adapter
Cable
Wire removed from----_-_
LINE OUT jack
17
To Next Page
Loading...
