HOW TO CONNECT YOUR VCR
Note: if your VCR has an unused AUDIO OUT jack,
see instruction A below, if the AUDIO OUT jack is
being used, see instruction B. mfyou have a TV
with a bultAn VCR, see instruction B. ff your VCR
is connected to your home stereo, see NOW TO
CONNECT YOUR HOME STEREO on page 17.
A, Plug one end of a long 1/8" to RCA stereo audio
cable (avalable at electronics stores) into the input
jack on the console, Plug the other end of the cable
into the AUDIO OUT jack on your VCR,
A
r ...... i
L_Ot. ;
Audio Cable
B, Plug one end of a long 1/8" to RCA stereo audio
cable (avalable at electronics stores) into the input
jack on the console, Plug the other end of the cable
into an RCA Y-adapter (avalable at electronics
stores), Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR
and plug the wire into the unused side of the Y-
adapter, Plug the Y-adapter into the AUDIO OUT
jack on your VCR,
Audio Cable Y-adapter
.__,_a_h 4 _--_
Wire removed from ----_:z_
AUDIO OUT jack
18
To Next Page
Loading...
