NordicTrack ELITE 7.4 - Assembly - Part 7: Backrest; Attaching the Backrest; Installing Backrest Cover

14
16. Attach the Backrest (8) to the Seat Frame (10)
with four M6 x 38mm Screws (75) and four M6
Washers (88); start all the Screws, and then
tighten them.
16
88
88
8
17. Attach the Backrest Cover (81) to the Backrest
(8) with two M6 x 18mm Screws (95).
95
95
81
8
17
75
75
10