NordicTrack Gxr 4.2 Bike - Page 11

11
11. Identify and orient the Pulse Bar (12) so that the
Pulse Grips (41) face upward.
Tip: Avoid pinching the Pulse Bar Pulse
Wire (72). While a second person holds the
Pulse Bar (12), attach the Pulse Bar to the Seat
Carriage (11) with two M8 x 45mm Screws (63)
and two M8 Split Washers (61).
Tip: It may be helpful to adjust the seat dur-
ing this step. See HOW TO ADJUST THE
SEAT on page 13.
11
72
41
12
11
61
63
41
Avoid pinching
the Pulse Bar
Pulse Wire (72)
12. Plug the Pulse Bar Pulse Wire (72) into the
Receptacle (75) located in the Left Seat
Shield (24).
12
72
75
24