NordicTrack Spacesaver SE7i User Manual

6
3. With the help of another person, place some
packing inserts from the packing material under
the front of the Frame (1) so that the Frame is
lifted off the floor. Have another person hold
the elliptical to prevent it from moving until
this step is completed.
If there are shipping supports attached to the
front of the Frame (1), remove the screws from
the shipping supports, and discard the screws
and the shipping supports.
Next, attach the Front Stabilizer (73) to the
Frame (1) with two M10 x 120mm Screws (84).
Then, remove the packing inserts and lower the
Front Stabilizer.
3
4. With the help of a second person, raise the
Upright (2) to the vertical position.
See the inset drawing. Tighten the Upright
Knob (85).
4
1
84
73
2
85

NordicTrack Spacesaver SE7i Specifications

General

Type	Elliptical
Resistance Levels	22
Stride Length	18 inches
Weight Capacity	325 lbs
Foldable	Yes
iFit Compatibility	Yes
Incline Type	Manual
Display	Backlit LCD
Dimensions	80 inches L x 32 inches W x 67 inches H
Flywheel Weight	13 lbs
Heart Rate Monitoring	EKG Grip Pulse