OPERATION AND ADJUSTMENT
HOW TO PLUG iN THE POWER CORD
This product is for use on a nominal 120-volt circuit
(see drawing 1). A temporary adapter may be used to
connect the surge suppressor to a 2-pole receptacle if
a properly-grounded outlet is not available (see draw-
ing 2).
Your treadmill, like other electronic equipment, can be
damaged by sudden voltage changes in your home's
power. To decrease the risk of damaging your
treadmill, always use a surge suppressor with your
treadmill (see drawing 1 at the right). To purchase
a surge suppressor, see precaution 12 on page 3.
Use only a single=outlet surge suppressor that is
UL 1449 listed as a transient voltage surge sup=
pressor (TVSS). The surge suppressor must have
a UL suppressed voltage rating of 400 volts or less
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps. There must be a moni-
toring light on the surge suppressor to indicate
whether it is functioning properly. Failure to use a
properly-functioning surge suppressor could dam-
age the control system of the treadmill (see precau-
tion 13 on page 3).
This product must be grounded. If it should mal-
function or break down, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This product's power cord has
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropri-
ate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
iMPORTANT: The treadmill is not compatible with
GFCl=equipped outlets and may not be compatible
with AFCl=equipped outlets.
2
I
Grounded Outlet Box
_'-! _Surge Suppressor
Grounding Pin
Grounded Outlet Grounding Plug
Outlet Box
Adapter
Surge Suppressor
Metal Screw
adapter should be used only until a properly-grounded
outlet (see drawing 1) can be installed by a qualified
electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly-grounded outlet box cover.
The adapter must be held in place by a metal screw.
Some 2=pole receptacle outlet box covers are not
grounded. Contact a qualified electrician to de =
termine if the outlet box cover is grounded before
using an adapter.
14
To Next Page
Loading...
Need help?
General
