Nordson
Corporation
OPERATOR'S
CARD
P/N 229 777C
Series 3100 Vl3400Yl3500
V|37O0V
Hot lVlelt lVaterial
Applicator
with Piston Pump,
Standard
Filter,
Standard
Control
Please Note
The operator's
card contains only information
necessary for daily operation
and maintenance.
For other information,
refer to the
product
manual.
A
copy of this operator's
card and an order form for
another operator's card
are
included in
the
introduction
part
of the
operating manual.
Always follow
the instructions
given
in the
operator's
card and operating manual.
Always follow instructions in
the material supplier's
Material
Safety Data
Sheet
(MSDS)
or material
information
sheet.
Even
at recommended operating
temperatures,
hot melt
material may release vapors. Exceeding
prescribed processing
temperatures
for long
periods
of time can result in
dangerous
decomposition by-products.
Remove vapors
by drawing
them off with an exhaust system.
a
a
A
WARNING:
Allow only
qualified
personnelto
perform
the
following
tasks.
Observe and
follow the safety instructions in
this document
and all other related documentation.
Safety Symbols
A
A
@
@
@
A
The following
symbols warn against
dangers or
possible
sources
of danger. Become familiar
with
them! Failure
to heed a warning symbolcan
lead to
personal
injury
and/or damage to the unit
or other
equipment.
WARNING:
Disconnect
equipment from line
voltage.
Failure to observe
can
result in
personal
injury or death.
WARNING:
Hot! Risk of
burns.
Wear
heat-protective
cloth in
g,
safety
goggles,
and/or
heat-protective
gloves
depending on the
symbol or symbols shown.
Failure to observe
can result in
personal
injury
or death.
WARNING:
Pressurized system or material.
Release
pressure.
Failure
to
obserue can
result in
serious burns.
WARNING:
Failure to observe can result
in
equipment
damage,
personal
injury
or death.
WARNING: Risk
of electrical shock. Failure
to
obserue can result
in
personal
injury
or death.
't
lssued
4/98
2297nC
To Next Page
Loading...
