Nordson 3500V Series - Features

RTD-Style Hot Melt Hose
11
Parallel Ground
Paths for Safe
Operation
Features
Two separate
ground
paths
protect
personnelfrom
injury and
equipment
from
damage.
A dedicated low-resistance
ground
reduces the
possibility
of high
impedance faults
and ensures
that
protective
devices operate
properly.
ln
addition
to the automatic
gun
and
handgun hoses, Nordson offers
RTD-style water wash hoses with lP-67
rated
plugs
and sealed cuffs
at
the
gun
end. High flex hoses
are available
for automatic
guns
used
on
robotic/articulated
applications.
High flex water wash
hoses are also
available.
CAUTION: High flex Nordson automatic
hoses must be used
in
all
robotic/articulated
applications to
avoid
premature
hose
failure. High flex
automatic
hoses are constructed to
withstand
the
flexing that
occurs
in moving
applications.
Standard
Nordson automatic hoses are not designed
for
these
applications and are not warranted if used
in
robotic/articulated
applications.
Available accessories include brackets, in-line
filters, fittings, hose
protectors,
suspension support, corrugated and braided
covers,
plug
repair kits, and a hose/gun diagnostic device.
Refer to Parts and
Reference Data,
Section 6,for
information.
o
Rugged,
quick-disconnect
plugs
for unit and
gun
end.
.
Automatic hoses feature an
abrasion-resistant
braided cover
and
maximum flexibility for easier installation even in confined
spaces.
.
Handgun hoses incorporate an optional corrugated outer
covering
that resists kinking to increase
durability
and extend service
life.
o
Area sensing RTD is
accurate to
within one degree of setpoint.
o
Molded
high-impact cuffs
increase
durability.
o
High-temperature insulation reduces heat loss.
o
HeaW
gauge
wire
increases durability.
o
Parallel
low-resistance
ground paths
for safe operation.
o
Aircraft
quality
fittings.
o
Stainless steel braided reinforcement.
.
Hightemperature Teflon core.
I
o
@
ADo
Nodson
Corporation
All rights ressrved
108 232E
lssued 1/00
Manual 45-21