Nordson 3500V Series - Programming TEMPERATURE Controls

A 1-8 Safety
9. Thermoplastic
Hot
Melt
Material
10.
Equipment
and Material
Disposal
NOTE:
Always refer
to the material manufacturer's
Material
Safety
Data
Sheet
(MSDS)
or material information
sheet
before working with any hot
melt material.
a
a
Ensure the work
area is adequately ventilated.
Do not
exceed recommended
processing
temperatures. Doing so
creates a danger
to
personnel
due
to decomposition of the material
Dispose
of equipment
and materials
used in operation and
cleaning
according to local regulations.
Al EN-02-[XX-SAFE]-1
lssued 11/94
O
1994 Nordson Corporation
All rights reserved