Introduction
2-3
Part 1073401_07
E 2021 Nordson Corporation
Product Description
See Figure 2‐1. Nordson DuraBlue adhesive melters are used in conjunction
with Nordson hot melt hoses and applicators to create a hot melt application
system.
The melter liquifies solid‐form hot melt and maintains the hot melt at the
desired temperature. When the applicators are activated, the melter pumps
the liquified hot melt through the hoses and out the applicator nozzles, where
it is commonly applied to the surface of a product.
1
2
3
Figure 2-1 System components
1. DuraBlue melter
2. Hot melt hose
3. Hot melt hand‐held applicator
To Next Page
Loading...
