© 2021 Nordson Corporation
1608259-03
6
Encore™ HD Mobile Powder Coating System
© 2021 Nordson Corporation
1608259-03
6
Encore™ HD Mobile Powder Coating System
Issued 05/21
Original copyright date 2015. Encore, Nordson, and the Nordson logo are registered trademarks of Nordson Corporation.
All other trademarks are the property of their respective owners.
MAINTENANCE CHECKS
Cleaning and Maintenance
At the end of each shift, perform a color change and inspect the nozzle and electrode assembly for signs of wear
or impact fusion.
Remove the suction line from the pickup tube and point it towards the powder collector.
Point the spray gun towards the powder collector.
Press the color change button on the controller and press enter.
Once the color change is complete, remove the nozzle and inspect for wear or impact fusion.
Inspect the pinch valves by looking at the clear block on the pump. If powder is present around the pinch valves,
pump maintenance is required.
Shutdown
After performing the cleaning and maintenance of the pump, the system can be shut down by pressing the
standby button on the system controller.
To Next Page
Loading...
Need help?
General
