Nordson FoamMelt 200 - Page 5

49-FM200-OP-01
Issued 3/01
5
Record of Vista Control Settings
Temperature Settings
Zone
T
Zone 1 Temperatures Zone 2 Temperatures Zone 3 Temperatures
Type
Operating Standby Band Operating Standby Band Operating Standby Band
Internal
Hose
Gun
Zone
T
Zone 4 Temperatures Zone 5 Temperatures Zone 6 Temperatures
Type
Operating Standby Band Operating Standby Band Operating Standby Band
Hose
Gun
Clock Settings
Heater Intervals Monday Tuesday Wednesday Thursday Friday Saturday Sunday
Heaters On-1
Heaters Off-1
Heaters On-2
Heaters Off-2
Standby Intervals
Standby On-1
Standby Off-1
Standby On-2
Standby Off-2
System Settings
Function Setting Function Setting
Startup
 Sequential
 Simultaneous
Auto-energize pump
 On
 Off
Ready or pump output
 Ready
 Pump on
Password
 On
 Off
Warning or power output
 Warning
 Power on
Auto-energize heaters
 On
 Off
System ready time delay Global temperature band
Pump speed rpm Overtemperature setpoint
Gas setting (bar/psi) Auto-energize pump temperature
Density reduction %