Converting an FP-200 Extrusion Gun to an FP-200 Swirl Gun
5
Part 237494_02
E 2012 Nordson Corporation
Figure 1 FP-200 Swirl Gun Components
1. Multi-plane swivel fitting
(hydraulic hose connection)
2. High-temperature air line tube
3. Gun mounting plate
4. Air regulator
5. Urethane air line tube
6. Trigger safety
7. Trigger
8. Trigger handle
9. Extrusion air line
10. Module (CF-200 Wide Pattern)
11. Air manifold
12. Swirl air line
13. Service block (gun body)
14. Cordset connection
15. Mounting bracket
To Next Page
Loading...
