3DJH
User’s Manual of Remote Controller
Notes:
①
.
When replacing the batteries, do not use old or different types of batteries,
otherwise, it may cause malfunction.
②
.
When you won’t use the remote controller for a long time, please take out the
batteries.
③
.
The operation of remote controller should be performed within its receiving
range.
④
.
The remote controller should be placed 1m away from the TV set or stereo
sound sets.
⑤
.
If the remote controller does not operate normally, please take the batteries
out and reinsert them after 30 seconds. If it still can't operate properly,
replace the batteries.
⑥
.
If you need to control the main unit, please point the remote controller at the
signal receiving window of the main unit to improve the receiving sensibility
of main unit.
⑦
.
When the remote controller is sending signal, “ ” icon will be blinking for 1
second. When the main unit receives valid remote control signal, it will give
out a sound.
To Next Page
Loading...
