Nortek YAP1F - 1.4 Introduction of special functions; 2 Remote Controller YV1 L1

3DJH
User’s Manual of Remote Controller
timer time of last setting.
b. Press
or button to adjust the timer time.
c. Press TOFF button again to confirm setting. OFF is displayed and time
displaying zone resumes to display current time.
d. Press TOFF button again to cancel timer and OFF is not displayed.
2
）
Setting timer on
a. Pressing TON button, “ON” is blinking and time displaying zone displays the
timer time of last setting.
b. Press
or button to adjust the timer time.
c. Press TON button again to confirm setting. ON is displayed and time
displaying zone resumes to display current time.
d. Press TON button again to cancel timer and ON is not displayed.
1.4 Introduction of special functions
（
1
）
Setting child lock
1
）
Press and button simultaneously to lock the buttons on remote
controller and
is displayed.
2
）
Press and button simultaneously again to unlock the buttons on
remote controller and is not displayed.
3
）
If the buttons are locked, blinks 3 times when pressing the button and
any operation on the button is invalid.
（
2
）
Switching temperature scale
In unit off status, press MODE button and
button simultaneously to switch
temperature scale between

and

.
（
3
）
Setting energy-saving function
1
）
In unit on status and under cool mode, press CLOCK and TEMP button
simultaneously to enter energy-saving mode.
 When
is displayed, energy-saving function is on.
 When
is not displayed, energy-saving function is off.
2
）
If you want to turn off the energy-saving function, press CLOCK and TEMP
button and
is not displayed.
Note: energy-saving function is only available in cooling mode and it will be exited
when switching mode or setting sleep function.