Nortek YAP1F - 3.2 Button name and function introduction (inside); 3.3 Preparation before operation; 3.4 Introduction of operation functions

3DJH
User’s Manual of Remote Controller
3.2 Button name and function introduction (inside)
No. Button name Function
1 MODE Set operation mode
2 TIMER ON Set timer on function
3 TIMER OFF Set timer off function
4 LIGHT Set light function
5 I FEEL Set I FEEL function
6 X-FAN Set X-FAN function
7 TEMP
Switch temperature displaying type on the
unit’s display
8 HEALTH Set health function
9 CLOCK Set clock of the system
10 SLEEP Set sleep function
3.3 Preparation before operation
When using the remote controller for the first time or after replacing the batteries,
please set the time of the system according to current time in the following steps:
（
1
）
Pressing CLOCK button,
is blinking.
（
2
）
Pressing ▲ or ▼ button, the clock time will increase or decrease rapidly.
（
3
）
Press CLOCK button again to confirm the time.
3.4 Introduction of operation functions
（
1
）
Selecting operation mode
In unit on status, press MODE button to select operation mode in following
sequence:
1
）
Pressing COOL button, the unit will operate under cool mode.
2
）
Pressing HEAT button, the unit will operate under heat mode.
（
2
）
Setting temperature